AFFORDABLE AIRPLANE SHIPPING SERVICES

dimensions available at this web site for the CH 750. Note, the tail is on the plane. Wings and propeller are off. http://zenithair.com/stolch750/750-performance.html  

 

 

This is a bid for transporting a disassembled kit aircraft from California to Minnesota. The aircraft has loose items, which may or may not be boxed.  

This airplane will be disassemble (dimensions are disassemble)  

The wings, horizontal and vertical stabilizer was removed. It's the same type of airplane in a disassembled condition in the attached pictures.  

 

 

I prefer to deal with someone who has transported aircraft in the past, but I will also consider bids from shippers who have not.  

Pics are in above web address under PDF link. I will be in Dallas on the 29th and 30th to help load. Aircraft is disassembled, packed up and wings wrapped with bubble wrap and ready to transport. There should be a crane available in Lancaster to assist with lifting aircraft onto trailer. Aircraft can also be rolled. Distance between main wheels is 92" from center to center. Dimensions are listed above. There will be a fuselage and two wings to transport. Plane can be picked up between December 30th and January 3rd. Flatbed 8.5' trailer would work ideal. Will have fork lift available upon arrival in Mesa, AZ to unload.  

Must be experienced it just how to secure a airplane. Wings are seperate 1 ft wide 4 ft high 16 ft long. 3 pieces total. Wings must be wrapped. Plane is a fabric covered wings are also. Pickup is about 1 mile away from pickup address given at storage facility.  

This trailer has a 2" ball and does have a 7 pin connection to work with brake lights. The seller (GA address) also has adapters if you have something other than a 7 pin set up. We previously listed this, only to have the shipper (who had a perfect uShip score) show up with a truck that could not pull the helicopter and damaged it in the process. He did not make it 20 miles, and could not return because he could not make it up a modest rise in the road. In order to be the winning bidder, you just send me picture(s) of the heavy duty truck you intend to use. If you show up with a different truck, one that is not equal to the job, the shipment will be cancelled, your uShip score will be impacted. If you or any member of your team who contacts us does not use english as their principal language, please do not bid. If we are contacted by or speak with any team member that does not understand english clearly, you will not be selected and/or shipment will be cancelled. This helicopter is intended for use by our charity, which entertains gravely and terminally ill children. We urge you to only bid on this if you feel you can safely deliver it.  

 

Fuselage, rudder, additional parts and plans to ship. I really don't want to spend more than $300 to ship this.  

Wing span 35 feet width 8 feet. Tail cone and tail feathers are separated from aircraft. There is no engine or propeller.  

hi the dimensions are aprox. its only the cabin , no winds , trailer it just to sit on where house it needs to be to place on a open trailer ,  

Military family moving cross country. Movers will not ship the airplane we are building. It is very light (<100lbs), but bulky and very fragile. It is only the tail section (tailcone, stabilator, and vertical stabilizer) which can be removed if absolutely necessary.  

 

as in pic plus two main blades and box of parts. width is change from 8' to 8' 6"  

Must disclose equipment needed to move, full replacement insurance ($19,000), permits and pilot cars.  

The measurements are with the wings removed. The wings are about 15 ft. each..Airplane and wings are covered by fabric and should be handled as FRAGILE shipment. Shippers with experience in this kind of load only please.  

 

Ok lets try this again. Only enclosed transport please. This is an ultra light aircraft that needs to go from one airport to another. The heaviest part is the fuselage at about 250 lbs. Each wing is about 100 lbs and the engine is about 70 lbs. Then there is misc parts which most can be boxed that are about 30 lbs. The airplane is apart meaning the wings, horizontal tail, engine and gear are removed. The antenna on the fuselage can be removed which would make it about 5 feet tall. The fuselage is 21 feet long and a 5 feet high and 3 feet wide. The wings are about 5 feet tall and 1 foot deep when they are sitting vertical like in the picture. The horizontal tails are each 3 feet by 3 feet and only inches thick. Then there are the misc parts, gear, prop, engine, muffler, doors and seats that can be mixed around. I do not want to do a whole bunch of packing and wrapping the fuselage and wings so this is why enclosed transport. The fabric covering is easily torn if poked so basic padding would be needed. Should be a piece of cake to move for someone with an enclosed trailer with padding and strapping materials. There is lots of flexibility in pick up. Thanks.  

Aircraft will be dis-assembled on 17 November with a 18 November pick-up. Driver to assist with loading. Photos show how these have been moved. Landing gear width is 7 ft 7 in. Will fit nicely on an 8 ft wide flat trailer.  

Wings detect outside of the wheels. It is all wood construction and will prepared for shipping at the airport. Wings are 8' long X 4' wide X 8"thick