AFFORDABLE AIRPLANE SHIPPING SERVICES
Compare Quotes and Book Online
Recent Listings
Aircraft is disassembled. Body of aircraft is sitting on wheels and the wings have been placed in racks. All items will be bubble wrapped and also wrapped in plastic. Some other small items may be placed in a few boxes, but they may all fit inside the body of the plane.
Lisbon, NH 03585 USA
minneapolis, MN 55199 USA
1/11/2011
$670.00
Airplane located at salvage yard with access to loading equipment and experienced people who can help load airplane.
Phoenix, AZ 85009 USA
East Wenatchee, WA 98802 USA
1/5/2011
$2,400.00
Weight is not exact as this aircraft is supposed to come with extra parts.
Wings are off aircraft and it is ready for loading.
Bid would be to move all parts, etc.
Norridgewock, ME 04957 USA
Portland, OR 97217 USA
11/7/2010
$3,500.00
Woodland, WA 98674 USA
Saint Louis, MO 63103 USA
10/24/2010
$719.00
This is a "Glastar" project (small airplane about the size of a Cessna 150) being picked up from Taylorsville NC going to Chelan WA 98816. The aircraft is already dissassembled on rolling gear.....total weight aprx 950 lbs (everything). The engine is in a crate. It has no instruments or electronics. It has never flown so no worry about fuel or oil. If using an enclosed trailer, wings will lean against side walls if secured. The tail end could be pulled down and secured to the deck levle if it's too tall for your enclosed trailer. There is no loading ramp or hoist, so a semi trailer will need ramps or lift. Open trailer is fine if you have specifically designed wing racks and all items are secured. I believe the total pieces will be 6 (fuselage, engine, 2 wings, engine cowling(in box), and horizontal stabalizer). I believe all other pieces will be inside fuselage. Value is $42,000. MUST BE INSURED WITH PROOF ! Better photos in a few days after it is prepped for shipping. Will be ready for pick up around 10/3/2010.
Thanks, Will
Taylorsville, NC 28681 USA
Chelan, WA 98816 USA
10/6/2010
$2,500.00
Stored in hangar/building on private property. Fuselage, 2 wings, horizontal stabilizer, cowl, and box or two of accessories. Engine is mounted, wings are not. Neither is horizontal stabilizer. No prop. Fabric and poly brush exterior (not metal). Wings approx 16' x 5' each.
Cleveland, TN 37323 USA
Chesapeake, VA 23321 USA
8/11/2010
$900.02
One jet aircraft wing and two intake cowlings.
Must lay flat. Photo is deceptive; this is a tapered wing. 7 feet wide and 20 inches thick at the wheel well (root) dropping off to 10 inches thick after about 18 inches. Wing tip is only 3 feet wide, but has pitot boom which makes it 7 feet total width. Must lay flat on tires with protection between such as carpet. Very strong and will not bend or bow except at trailing edge.
Denison, TX 75021 USA
Immokalee, FL 34142 USA
8/9/2010
$600.00
This is a amateur-built, fiberglass kit airplane that is in sections, not assembled. It will be crated and ready for pickup and shipment by the manufacturer.
Weyauwega, WI 54983 USA
Houston, TX 77043 USA
7/29/2010
$1,250.00
Soldotna, AK 99669 USA
Black Canyon City, AZ 85324 USA
7/25/2010
$2,250.00
This is an A/W 95 Ultralight Helicopter airframe.
Origin: Georgia
Destination: New Hampshire
Atlanta, GA 30344 USA
Exeter, NH 03833 USA
7/19/2010
$1,000.00
this is a light sport and the wings will be removed and shipped with airplane
Gig Harbor, WA 98335 USA
Seward, NE 68434 USA
7/10/2010
$2,536.00
the complete parts of the plane needs to be loaded, secured in place , and transported to the destination .
the trailer you see in the pictures it´s not included ,is only for storing the parts.
It´s a small kit plane thats partially built so the parts are very light and could be loaded manually .
also I need a quotation for a wooden crate that could contain the parts of this kit plane ,measures: 15 ft x 5 ft x 7 ft, aproximately, this box needs to be sturdy enought ,loaded on site and delivered to the port of los angeles to be shipped overseas.
its a europa kit plane partially built , the wings are almost complete and the fuselage halves are in two pieces ,all other parts are loose parts in boxes and also there you have already built wood bed mounts for the wings and fuselage to secure them to the crate floor .
Buckeye, AZ 85326 USA
Los Angeles, CA 90013 USA
7/1/2010
$850.00
this is an exp aircraft in its own trailer; just hook up and drive
Clark, NJ 07066 USA
Doniphan, MO 63935 USA
6/24/2010
$898.05
Aircraft propeller is apparently already crated and ready to pick up.
Weyers Cave, VA 24486 USA
la jolla, CA 92037 USA
5/27/2010
$150.00
A very simple job. Aircraft is on a custom trailer weighing 1500lbs with new tires ( 2 inch ball)ready to go anywhere! Any light truck could pull this item. Going form Mt Dora Florida (32757) to Ogdensburg Ny (13669) or Syracuse ...Scott NO real time frame but looking for someone heading that way to offset their fuel costs!!
Mount Dora, FL 32757 USA
Ogdensburg, NY 13669 USA
4/14/2010
$900.00
The wings and the empennage have been taken off. Does not have an engine. The wings have to be transported with the airframe will fit underneat the airframe for transport but have to be secured and protected to avoid damage to flight surfaces.
Auburndale, FL 33823 USA
El Paso, TX 79928 USA
4/8/2010
$1,400.00
i have a 1980scorpion 133 two seat experimental helicopter wich i would like moved saftly from washington,utah to salem origon.rotors and tail rotor have been takin of.pickup adress can load helicopter.also dropoff adres can unload.time fram to move would be two weeks away ie mid april aprox to give seller time to dishmantall.
Washington, UT 84780 USA
Dayton, OR 97114 USA
4/7/2010
$1,230.00
Wing is not connected and folded up and bagged, approx. length just under 20ft.
Wildwood, GA 30757 USA
Anacortes, WA 98221 USA
3/23/2010
$1,660.00
Pallet only weights 50 lbs. Easy to load.
Peoria, AZ 85381 USA
Jewett City, CT 06351 USA
3/22/2010
$280.00
Patially built kit airplane - wings off
Not on landing gear
Fuselage Length - 19 Ft
Tail width - 8 Ft
Tail height 5 Ft
Detachched wings(2) - Length 19 Ft
Width 5 Ft
Additional Parts in Boxes - 200 Lbs est
Wellsburg, WV 26070 USA
Carthage, NC 28327 USA
3/1/2010
$775.00
The Nose of the aircraft can be propped up to lower the tail.
Greeley, CO 80631 USA
Marion, IA 52302 USA
2/9/2010
$1,500.00
This is a small wooden airplane that is unfinished. It has several boxs of parts that go with it. I think most of it will fit in the dimensions stated. No engine.Open or closed trailor ok, but needs to be tarped if open.
Kingsbury, TX 78638 USA
Louisburg, NC 27549 USA
12/31/2009
$650.00
We know airplane delivery calls for someone highly specialized and reliable. Let uShip help you find the best service provider for your airplane transport. Above, you'll find our cost-to-ship index tool which shows you previous aircraft deliveries completed through the uShip marketplace. This should give you some insight into how we work as well as a good idea for how much it costs to transport aircraft. When you're ready to get quotes directly from aircraft transport specialists, create your listing by clicking the "Get Free Quotes" button at the top of the page. Be sure to have as much information as possible handy and be detailed in your description of your airplane transport. Once your listing is complete, you'll start receiving rates to transport aircraft directly from carriers bidding for your business. This ensures you get the cheapest airplane transport options. You'll want to check out each transporter's profile, where uShip makes it easy to find their transport history as well as their safety records. When you find a carrier who fits your needs at a rate within your budget, accept the bid to work directly with your carrier on completing your aircraft delivery.